How To Install and Configure Debian 10 Buster with GNOME

Do you need an ultimate Guide to Install and Configure Debian 10 Buster with GNOME? This tutorial is the best option for you. Here, we have provided step-by-step instructions about how to install Debian 10 Buster with a GNOME desktop. Just have a look at the features of the Debian 10 before entering to discuss how to install and configure it using GNOME.

What is Debian?

Debian is an operating system for a wide range of devices including laptops, desktops, and servers. The developers of Debian will provide the security updates for all packages for almost of their lifetime. The current stable distribution of Debian is version 10, codenamed buster. Check out the features of the current version of the buster from the below modules.

Features of Debian 10 Buster

Initially, it was released on the 6th of July 2019, and it has come with a lot of very great features for system administrators. Have a look at them:

  • JDK update from the OpenJDK 8.0 to the new OpenJDK 11.0 version.
  • Debian 10 is now using version 3.30 of GNOME, featuring an increased desktop performance, screen sharing, and improved ways to remotely connect to Windows hosts.
  • Secure boot is now enabled by default, which means that you don’t have to disable it when trying to install Debian 10 on your machine.
  • Upgrade to Bash 5.0 essentially providing more variables for sysadmins to play with (EPOCHSECONDS or EPOCHREALTIME for example).
  • A lot of software updates: Apache 2.4.38, systemd 241, Vim 8.1, Python 3 3.7.2, and many more.
  • IPtables is being replaced by NFtables, providing an easier syntax and a more efficient way to handle your firewall rules.

After referring to these above points, you know what’s available in the brand new Debian 10 buster distribution, now it’s time for installation and configuration of Debian 10.

Do Check: How To Install InfluxDB on Windows

Suggested System Requirements for Debian 10

  • 2 GB RAM
  • 2 GHz Dual Core Processor
  • 10 GB Free Hard disk space
  • Bootable Installation Media (USB/ DVD)
  • Internet connectivity (Optional)

Now, dive into the installation & configuration steps of Debian 10 Buster

How to Install and Configure Debian 10 with GNOME?

The following are the detailed steps to install and configure the current version of Debian 10 using GNOME:

Steps to Create a Bootable USB stick on Linux

In order to install Debian 10 buster, you need to “flash” an ISO image to a USB stick, making it “bootable“.

The Debian 10 buster image is about 2 GB in size (if you choose to have a desktop environment with it), so I would recommend that you choose a USB drive that is at least 3GB large or more.

If you don’t have a USB drive that large, you can opt for minimal versions of Debian 10 Buster.

I – Create a Bootable USB stick on Linux

In my home setup, I have a Xubuntu 18.04 instance, so this is what I will use to create my bootable image.

Steps are pretty much the same for other distributions. For Windows, you would need to use Rufus to create a bootable image.

a – Plug your USB stick in the USB port

Within a couple of seconds, the operating system should automatically mount your USB drive in your filesystem (it should be mounted at the /media mount point by default).

How To Install and Configure Debian 10 Buster with GNOME volume-mounted

b – Identify where your USB drive is mounted

To get the mount point of your USB drive, you can use the lsblk command.

How To Install and Configure Debian 10 Buster with GNOME lsblk-1

As you can see, my USB drive is named “sdb”, it has one partition (part) named “sdb1” and it is mounted on “/media/antoine/7830-961F”.

Alternatively, you could use the df command to have some information about the remaining space on your USB drive.

How To Install and Configure Debian 10 Buster with GNOME df-ht

c – Download Debian 10 Buster ISO file

Your USB is ready, now you can download the ISO file to flash your drive.

The distribution images are located here. For this tutorial, I am using the Debian 10 Buster GNOME edition for amd64 processors.

If you are more familiar with another environment like Cinnamon or KDE, they are all available in the downloads page.

Run a simple wget command on any folder that you want (my home folder in this case)

$ wget https://cdimage.debian.org/debian-cd/current-live/amd64/iso-hybrid/debian-live-10.0.0-amd64-gnome.iso

If you need a more minimal distribution, you can go for the netinst version, but desktop environments might not be included.

$ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.0.0-amd64-netinst.iso<

How To Install and Configure Debian 10 Buster with GNOME wget

d – Copy the image to your USB drive

To copy the image, we are going to use the dd command.

$ sudo dd if=/home/antoine/debian-live-10.0.0-amd64-gnome.iso of=/dev/sdb && sync

e – Boot on the USB drive

Now that your USB drive contains the ISO file, it is time for you to boot from it.

On most configurations, you should be able to boot on the USB by pressing ESC, F1, F2, or F8 when starting your computer.

Follow the Debian 10 Graphical Installation Steps

This is the screen that you should see once you successfully booted on the Debian 10 installer.

Select the “Graphical Debian Installer” option.

How To Install and Configure Debian 10 Buster with GNOME step-1First, you are asked to select a language.

I’ll go for English for this one.

How To Install and Configure Debian 10 Buster with GNOME step-2

On the next screen, you are asked to select a location.

I’ll pick the United States as an example.

How To Install and Configure Debian 10 Buster with GNOME step-3

Then, choose your keyboard layout. (don’t worry, you can change it later on if you want).

I’ll go for American English for this example.

How To Install and Configure Debian 10 Buster with GNOME step-3

From there, a couple of automatic checks are done within your installation.

Debian 10 will try to load additional components from the bootable device and it will perform some automatic network checks.

How To Install and Configure Debian 10 Buster with GNOME step-5

After the checks, you are asked to set a hostname for your computer.

As indicated, this is the name that will be used to identify your computer on a network.

I’ll go for “Debian-10” in this case.
How To Install and Configure Debian 10 Buster with GNOME step-7
You are asked to configure the domain name for your host. You can leave this option blank.
How To Install and Configure Debian 10 Buster with GNOME step-8

Be careful on the next step, there is a little bit of a gotcha when it comes to root passwords.

You want to leave this option blank.

As a consequence, Debian will use the password of the user you will create in the next step to perform sudo operations.

Moreover, the root account will be disabled which is interesting for security purposes.

Nonetheless, if you want to specify a specific password for root, you can do it here, but I wouldn’t recommend it.

How To Install and Configure Debian 10 Buster with GNOME step-9
Click continue, and now it is time for you to specify the real name for the user.

I’ll go for JunosNotes but feel free to mention your real name and first name.

How To Install and Configure Debian 10 Buster with GNOME step-10

Then, you have to choose a username for your host.

JunoNotes will do the trick for me.

How To Install and Configure Debian 10 Buster with GNOME step-11

Then, choose a very secure password for your host.

How To Install and Configure Debian 10 Buster with GNOME step-12

Choose a time zone for your host.

Be careful on this point as time zones are very important when it comes to logging for example.

How To Install and Configure Debian 10 Buster with GNOME step-13

From there, Debian 10 Buster will start detecting disks on your host.

How To Install and Configure Debian 10 Buster with GNOME step-14

After it is done, you will be asked for a way to partition your disks.

Go for the Guided (use entire disk) version unless you have special requirements that need to set up LVM.

How To Install and Configure Debian 10 Buster with GNOME step-15

Select the disk you want to partition.

In my case, I have only one disk on the system, so I’ll pick it.

How To Install and Configure Debian 10 Buster with GNOME step-16

For the partitioning scheme, go for “All files in one partition“, which should suit your needs.

How To Install and Configure Debian 10 Buster with GNOME step-17

For the automatic partitioning, Debian 10 creates two partitions, a primary and a swap one (when you run out of memory!)

How To Install and Configure Debian 10 Buster with GNOME step-19

If you are happy with the partitioning, simply press the “Finish partitioning and write changes to disk” option.

On the next screen, you are asked for confirmation about the previous partitioning.

Simply check “Yes” on the two options prompted.

How To Install and Configure Debian 10 Buster with GNOME step-20

From there, the installation should begin on your system.

How To Install and Configure Debian 10 Buster with GNOME step-21 How To Install and Configure Debian 10 Buster with GNOME step-22

On the next step, you have prompted the choice to use a network mirror to supplement the software included in the USB drive.

You want to press “Yes

How To Install and Configure Debian 10 Buster with GNOME step-23

By pressing “Yes”, you are asked to choose a location that is close to your network. I’ll use the United States in this case.

How To Install and Configure Debian 10 Buster with GNOME step-24

Then, choose a Debian archive mirror for your distribution.

I’ll stick with the deb.debian.org one.

How To Install and Configure Debian 10 Buster with GNOME step-25

If you are using a proxy, this is where you want to configure it. I am not using one, so I’ll leave it blank.

How To Install and Configure Debian 10 Buster with GNOME step-26

Debian 10 Buster will start configuring apt and will try to install the GRUB boot loader on your instance.

How To Install and Configure Debian 10 Buster with GNOME step-27 How To Install and Configure Debian 10 Buster with GNOME step-28

On the next step, you are asked if you want to GRUB boot loader to the master boot record, you obviously want to press “Yes” to that.

How To Install and Configure Debian 10 Buster with GNOME step-29

On the next screen, select the hard drive where you want the GRUB boot loader to be installed and press Continue.

How To Install and Configure Debian 10 Buster with GNOME step-30

Done!

The installation should be completed at this point.

How To Install and Configure Debian 10 Buster with GNOME step-32

On the lock screen, type the password that you set up in the installation phase, and this is the screen that you should see.

How To Install and Configure Debian 10 Buster with GNOME backgorund

Awesome! You now have Debian 10 on your instance.

But this tutorial is not over. Before continuing, there are a few minimal configurations that you want to do on your Debian 10 buster instance for it to be all correctly configured.

Steps to Configure your Debian 10 Buster

Before playing with your new Debian 10 buster machine, there are a few steps that you need to complete.

a – Enable unofficial Debian software download

By default, downloading Debian software (like the tools that you would find in the Software store) are disabled by default.

To enable them, head to “Activities”, and type “Software Updates”.

How To Install and Configure Debian 10 Buster with GNOME step-34-bisIn the next window, the first and the last checkbox should be already checked.

Check the “DFSG-compatible Software with Non-Free Dependencies (contrib)” option and the “Non-DFSG-compatible Software (non-free)” option.

How To Install and Configure Debian 10 Buster with GNOME step-35

Click on “Close“. From there, you will be asked to confirm your choice by reloading the information about available software.

Simply click on “Reload“.

How To Install and Configure Debian 10 Buster with GNOME step-36

Head to the Store by typing “Store” into the Activities search box.

If you are seeing third-party applications, it means that the previous step worked correctly.

How To Install and Configure Debian 10 Buster with GNOME step-38

b – Install wget to download files from Internet

wget is not installed by default on your instance.

$ sudo apt install wget

How To Install and Configure Debian 10 Buster with GNOME step-39

c – Install your NVIDIA drivers

The NVIDIA driver installation process is pretty straightforward.

Simply run the “nvidia-detect” command in your terminal and this utility will tell you which driver you have to install depending on your graphics card.

First, install nvidia-detect

$ sudo apt install nvidia-detect

How To Install and Configure Debian 10 Buster with GNOME step-42

From there, run the nvidia-detect utility in your command line.

$ nvidia-detect
Detected NVIDIA GPUs:
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108 [GeForce GT 430] [10de:0de1] (rev a1)
Your card is supported by the default drivers.
It is recommended to install the
    nvidia-driver
package.

As you can see, the nvidia-detect utility states that I need to install the nvidia-driver package for my instance, so this is what I am going to do.

$ sudo apt install nvidia-driver

d – Install Dash To Dock

As a Debian user, I hate going to the top left Applications menu just to find my web browser or to browse my filesystem.

As a consequence, similarly to MacOS graphical interfaces, I would like a static application dock to be visible on my desktop, all the time.

How To Install and Configure Debian 10 Buster with GNOME step-43

To install it, head to the “Store” by typing “Store” in the Applications search box. This is the window that you should see.

How To Install and Configure Debian 10 Buster with GNOME step-44

Click on “Add-ons”, and then select the “Shell Extensions tab“. You should see a list of shell extensions available for your Debian distribution.

In the top search bar, type “Dash To Dock“. Click on “Install” when you found the “Dash To Dock” store item.

How To Install and Configure Debian 10 Buster with GNOME step-40-dash-dock

Simply click “Install” on the next window that is prompted on the screen.

How To Install and Configure Debian 10 Buster with GNOME step-41-dash-dock

That’s it!

You now have a dash to dock on your desktop.

How To Install and Configure Debian 10 Buster with GNOME featured-1

Going Further

Your adventure with Debian 10 has only begun, but I would recommend that you start configuring your host if you plan on using it as a server.

Here’s a very good video of Linux Tex that explains all the things that you should do after installing your Debian 10 installation.

Some of the steps are already covered in this tutorial, but for the others, feel free to watch his video as it explains the procedures quite in detail.

 

Leave a Reply

Your email address will not be published.